Ricoh GR-C1 Series Service Training page 53

When one sided originals and two sided originals are mixed, users can
switch the scanning to one side or both sides in a single batch scan job.
If this is done correctly, blank sides of one-sided originals in the batch
will not be scanned.
An ARDF and a HDD are required for this function.
Slide 53
No additional notes
Workflow Improvement
Enhanced Batch Scan
Separate one sided originals from two sided originals within your stack of
originals
Select "Batch" mode for and specify "Original Settings"
Set the correct portion of the batch of originals on the ADF and start
scanning
When scanning of the first portion is finished, change "Original Settings"
and set the other portion.
53
GR-C1 Training