Before Removing PM Parts or Yield Parts
Output the SMC logging data with SP5-990-004.
Set the following SPs to "1" before you turn the
power off to remove these parts. Then, the
machine will reset the PM counters
automatically.
PCDU (K): SP3701-009
» Developer initialization will also be done automatically.
Waste Toner Bottle (if not full or near-full):
SP3701-020
Other PM counters (such as the fusing unit) must
be reset manually, after replacing the part.
Slide 101
Service manual > Preventive Maintenance > PM Parts
101
GR-C1 Training
Settings