Ricoh GR-C1 Series Service Training page 90

Customers can use an external USB keyboard when the
software keyboard is shown on the operation panel, if an
external USB keyboard is connected to the USB port at the
side of the operation panel or the controller box USB port.
Do the following steps to enable this feature.
Slide 90
No additional notes
External USB Keyboard
1. Connect the external keyboard to the USB port at the right
side of the operation panel or the controller box USB port.
2. Enter the SP mode and set SP5-075-001 to 1 (ON)
3. Exit SP mode and turn the main power on and off.
4. Select a language type for the external USB keyboard
with [User Tools] > [System Settings] > [General
Features] > [External Keyboard].
5. Turn the main power on and off.
90
GR-C1 Training