Ricoh GR-C1 Series Service Training page 8

Status Key and
Error Lamp
Status key: When the error lamp lights, press this key. The machine
displays a list that shows the status of all jobs
Energy saver key: There is no operation panel power button, only this
energy saver button. Press this once, and the machine goes to the energy
saver mode.
Stop key: For the GW+ controller, this button can be used to stop all types
of jobs, including printer, fax, etc.
Slide 8
No additional notes
Operation Panel - 2
To cut the power, turn of the main switch; the machine goes into the safe
shutdown process.
Energy saver lamp: Blinks slowly when the machine is in energy saver
mode. Stays off when the machine is in normal operation mode (full
power).
With the old GW controller, this button can only be used to stop copy jobs.
8
GR-C1 Training
Energy Saver
Key and Lamp