Ricoh GR-C1 Series Service Training page 44

Slide 44
No additional notes
Workflow Improvement
External USB Keyboard
44
This lets you use a Windows-
compatible external USB
Keyboard for typing when the
software keyboard is displayed
in GW applications.
Before you can use an external
USB keyboard for GW
applications, it must be enabled
with SP mode 5075. (Default
setting: for SDK applications)
You cannot type in both SDK
applications and GW
applications from one
keyboard. If the USB keyboard
is used for GW applications, it
can't be used for SDK
applications.
The external USB keyboard can
be connected to the USB port on
the operation panel or the USB
port on the back of the controller
board.
Keyboards and tables are not
provided as options.
GR-C1 Training
7