Replacing The Rack Doors; Replacing The Rack Doors On A Dell 42U Rack; Replacing The Rack Doors On A Dell 24U Rack - Dell PowerVault 630F Installation Manual

support.dell.com

Replacing the Rack Doors

The following subsections describe procedures for replacing the rack doors on the
42U rack and the 24U rack.

Replacing the Rack Doors on a Dell 42U Rack

CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to remove or replace the doors by yourself.
1. Lift the front door into position, and align the hinges with the holes in the rack as
shown in Figure 1-3.
2. Slide the hinges into the holes in the rack until the hinge release levers lock the
hinges into position.
3. Close the door latch by rotating the handle counterclockwise until it stops, push
in the handle until it locks in position, and then slide the button cover down over
the push button (see Figure 1-2).
4. Repeat steps 1 through 3 to install the back door.

Replacing the Rack Doors on a Dell 24U Rack

CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to remove or replace the doors by yourself.
1. Lift the front door into position and align the hinges with the holes in the rack
(see Figure 1-5).
2. Line up the door hinges and then press them down.
3. Close the door latch by rotating the handle counterclockwise until it stops, and
then push the handle in until it locks in position.
4. Repeat steps 1 through 3 to install the back door.
This completes the rack installation for the PowerVault 630F and 650F storage sys-
tems and SPSs.
Dell PowerVault Storage Systems — Rack Installation Guide 1-27