support.dell.com
Figure 1-21. Installing a DAE Storage System in the Rack
3.
Secure the front of the storage system to the rack.
•
For a DPE, secure the brackets on each side of the storage system to the
cage-nuts in the front vertical rails, using two M5 Phillips pan-head screws
(see Figure 1-22). (The screw passes through the upper or lower opening in
the bracket, depending on the location of the cage-nut in the rack.)
Dell PowerVault Storage Systems — Rack Installation Guide 1-25
retention bracket
support rail (2)
DAE storage system