Figure 1-7. Installing A Cage-Nut In The Rack - Dell PowerVault 630F Installation Manual

1-10 Dell PowerVault Storage Systems — Rack Installation Guide
cage-nut
installation tool

Figure 1-7. Installing a Cage-Nut in the Rack

3. Install the 900-W SPS tray in the rack (see Figure 1-8).
a. Insert the SPS tray into the front of the rack.
b. Align the lower edge of the SPS tray with the mark on the vertical rails.
c. Secure the SPS tray to the front vertical rails using two M5 x 16-mm Phillips-
head screws with washers.
d. Secure the SPS tray to the back vertical rails using four M5 x 16-mm Phillips-
head screws and four M5 washers (see Figure 1-8 and Figure 1-9).
inner side of
vertical rail
cage-nut