Major Messages And Actions; Warning Messages - Konica Minolta bizhub C3850 User Manual

4.8

Major messages and actions

4.8 Major messages and actions
Check the displayed message, then take the appropriate action. If messages other than those listed below
have been displayed, follow them to perform processing.

Warning messages

Message
[Memory Overflow]
[HDD is low on disk space.]
[Replenish paper.]
[Toner is low.]
[Replenish Toner]
[Replace imaging unit]
[Replace Image Transfer Belt
Unit]
[Replace Fusing Unit]
[Replace Toner Filter]
[Waste Toner Box will require
replacement soon.]
[Replace Transfer Roller Unit]
[Incorrect toner cartridge]
[Incorrect imaging unit]
[Incorrect HDD]
[USB hub is not supported.]
[The USB device is invalid.]
[IEEE 802.1x Authentication
failure.]
[IEEE802.1x Authenticating]
[Fax Memory Low]
[No HDD is installed.]
[Fax RX Job Max Over]
[Maintenance/Troubleshooting]
Description
Not enough memory to print on a
copy basis.
The HDD free space is insuffi-
cient.
No paper is loaded in the tray.
The toner is about to run out.
Toner is depleted.
The operating life of the Imaging
Unit has expired.
The operating life of the Transfer
Belt Unit has expired. Printing is
possible, but the printing quality
is not assured.
The operating life of the Fusing
Unit has expired. Printing is pos-
sible, but the printing quality is
not assured.
The operating life of the Toner
Filter has expired.
The Waste Toner Bottle will be-
come full soon.
The operating life of the Transfer
Roller has expired. Printing is
possible, but the printing quality
is not assured.
An incorrect Toner Cartridge
has been installed.
An incorrect Imaging Unit has
been installed.
An incorrect HDD has been in-
stalled.
A hub has been connected to the
USB port.
An incompatible USB device has
been connected to the USB port.
IEEE802.1x authentication has
not been executed normally,
causing a timeout.
IEEE802.1X authentication is
currently executed.
The fax data storage area is in-
sufficient.
The HDD is not installed.
The number of registered fax RX
jobs has reached the upper limit.
Remedy
Print only the first page.
Delete data saved on the HDD, if
necessary.
Add paper.
Prepare the specified Toner Car-
tridge.
Replace the Toner Cartridge.
For details, refer to page 2-3.
Replace the Imaging Unit.
For details, refer to page 2-7.
Replace the Transfer Belt Unit.
For details, refer to page 2-15.
Replace the Fusing Unit.
For details, refer to page 2-22.
Replace the Toner Filter.
For details, refer to page 2-20.
Prepare a new Waste Toner Bottle.
Replace the Transfer Roller.
For details, refer to page 2-13.
Install a Toner Cartridge which is
our genuine product with the correct
color and correct marketing area.
Install an Imaging Unit which is our
genuine product with the correct
color and correct marketing area.
Select [Utility] - [Administrator Set-
tings] - [Security Settings] - [HDD
Settings], then format the HDD.
Remove the USB hub.
Disconnect the USB device.
Restart this machine.
Wait until authentication is complet-
ed.
Check fax jobs. Delete fax jobs, if
necessary.
Install the HDD.
Print or cancel fax RX jobs.
4
4-16