R e m o v i n g t h e I / O C o o l i n g Fa n ( M i n i To w e r C h a s s i s )
fan release tabs (2)
Replacing the I/O Cooling Fan
NOTICE:
Ensure that the fan is properly installed on the guide bracket. When
the fan is properly installed, the fan's manufacturer label should face the
expansion-card guide, and the fan's power cable should extend toward the
system board. Airflow for the fan should enter the chassis through the front
panel and be moved by the fan to the chassis interior.
Insert the bottom of the cooling fan into the clips on the card guide. Then,
press the top of the fan toward the card guide until the tabs on the card
guide grasp the fan. See
"Removing the I/O Cooling Fan (Mini Tower
Chassis)."
I/O cooling fan
expansion-card guide
I/ O Cooling Fan ( Mini Tower C hassis Only)
115