Replacing A Cooling Fan Module - Dell POWEREDGE 1950 Hardware Owner's Manual

Figure 3-4. Removing and Installing a Cooling Fan
1
1 cooling fan modules (4)
4 cooling fan module connector

Replacing a Cooling Fan Module

NOTE:
The procedure for installing each individual fan is the same.
1 Ensure that the fan handle is upright and lower the fan into its retention base until the fan is fully seated.
Then lower the fan handle until it snaps into place. See Figure 3-4.
2 Attach the fan module connectors.
3 If you removed the memory cooling shroud to access the fan modules, replace the shroud. See "Replacing
the Memory Cooling Shroud" on page 53.
4 Close the system. See "Opening and Closing the System" on page 46.
2
2 fan module handles
5 system board cooling shroud
3
4
5
3 module wire harness
Installing System Components
49