R e m o v i n g t h e D i s k e t t e D r i v e f r o m t h e B r a c k e t ( D e s k t o p
C h a s s i s )
screw
Replacing the Diskette Drive (Desktop Chassis)
Mount the diskette drive on the bracket:
1
Lower the right side of the diskette drive onto the bracket,
a
inserting the drive retention pins into the screw holes on the drive.
See
"Removing the Diskette Drive from the Bracket (Desktop
Chassis)."
Lower the left side of the diskette drive downward and secure it to
b
the bracket with the screw you removed in
Diskette Drive (Desktop
Slide the drive assembly into the chassis until the green diskette-drive
2
bracket release button snaps securely into place. See
Diskette-Drive Bracket (Desktop
Connect the interface cable for the drive. To locate this connector, see
3
"System Board
Components" or
step 5
of
Chassis)."
"Removing the
Chassis)."
"Interior Service
Label."
drive
drive retention pins (2)
drive bracket
"Removing the
D i s k D ri ve s a n d M e d i a
67