AC power
cable
54
Po we r Supply
R o t a t i n g t h e P o w e r S u p p l y ( M i n i To w e r C h a s s i s )
power supply
Removing the Power Supply (Mini Tower Chassis)
Rotate the power supply
1
Disconnect the power supply cables from all drives.
2
Disconnect the power supply cables from the system board.
3
Lift the front of the power supply up to its fully extended position.
4
Rotate the right side of the power supply up and away from the chassis.
5
The pivot pin on the right rear of the power supply rises up and exits
the chassis slot.
securing tab
release latch
away from the system board.