Dell Precision 330 Service Manual page 86

86 Disk Dri ves and Media
If you are installing a SCSI device, ensure that the SCSI interface
b
cable is properly connected to the interface connector on the SCSI
controller board.
Connect a DC power cable to the power input connector on the back
4
of the drive (see the following figure).
A t t a c h i n g D r i v e C a b l e s ( M i n i To w e r C h a s s i s )
power input
connector
DC power cable
Ensure that all cables are firmly connected. Fold cables out of the way
5
to provide airflow for the fan and cooling vents.
secondary
system board
EIDE connector
interface connector
interface cable