NETGEAR GS418TPP User Manual page 281

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Precedence field is set. You must select an IP precedence value from 0 to 7 from the
menu.
• Mark IP DSCP. Packets are marked by DiffServ with the specified DSCP value before
being forwarded. This selection requires that the DSCP field is set. You must select a
DSCP code from the menu. The menu includes Other as a selection, which lets you
enter an IP DSCP value from 0 to 63. The DSCP value is defined as the high-order
six bits of the Service Type octet in the IP header.
14. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 71. DiffServ policy configuration policy attribute
Field
Policy Name
Policy Type
Member Class Name
Rename an existing DiffServ policy
To rename an existing DiffServ policy:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select QoS > DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
6. Select the check box next to the policy name.
7. In the Policy Name field, specify the new name.
8. Click the Apply button.
Your settings are saved.
Configure Quality of Service
Description
The name of the DiffServ policy.
The type of the policy, which is always inbound (In).
The name of the class instance within the policy.
281 User Manual