8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
Remove MLD snooping from a VLAN
To remove MLD snooping from a VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> Multicast > MLD Snooping > MLD VLAN Configuration.
The MLD VLAN Configuration page displays.
6. Select the check box next to the VLAN ID.
7. Click the Delete button.
MLD snooping is removed from the VLAN.
Configure one or more MLD multicast router interfaces
To configure one or more MLD multicast router interfaces:
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
8. Launch a web browser.
9. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the default IP address of the
switch on page 13.
The login window opens.
10. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
11. Select Switching> Multicast > MLD Snooping > Multicast Router Configuration.
Configure Switching
200
User Manual