NETGEAR GS418TPP User Manual page 307

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > SCC Control.
6. Select the one of the following SCC Admin Mode radio buttons:
• Enable. SCC can discover the switch and perform actions on the switch. This is the
default setting.
• Disable. SCC can discover the switch but cannot perform any actions on the switch.
Note: Because the switch administrator password is contained in each
NETGEAR Switch Discovery Protocol (NSDP) packet, disabling SCC
increases the switch security.
7. Click the Apply button.
Your settings are saved.
Manage Device Security 307 User Manual