NETGEAR GS418TPP User Manual page 148

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
it maintains this value. Otherwise, the priority is set to zero. The assigned VLAN ID is verified
against the VLAN table. If the VLAN is valid, ingress processing on the packet continues.
Otherwise, the packet is dropped. This implies that the user is allowed to configure a MAC
address mapping to a VLAN that was not created on the system.
Add a MAC-based VLAN
To add a MAC-based VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the default IP address of the
switch on page 13.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching> VLAN > Advanced > MAC Based VLAN.
6. In the MAC Address field, enter a valid MAC address to be bound to a VLAN ID.
This field is configurable only when a MAC-based VLAN is created.
7. In the VLAN ID field, specify a VLAN ID in the range of 1 to 4093.
8. Click the Add button.
The MAC address is added to the VLAN mapping.
Delete a MAC address from the VLAN mapping
To delete a MAC address from the VLAN mapping:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
Configure Switching 148 User Manual