NETGEAR GS418TPP User Manual page 107

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
9. Click the Apply button.
Your settings are saved.
View the DHCP L2 relay interface statistics
You can view information about the DHCP L2 relay interface.
To view DHCP L2 relay interface statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System> Services > DHCP L2 Relay > DHCP L2 Relay Interface Statistics.
The following table describes the nonconfigurable data that is displayed.
Field
Interface
Untrusted Server
Messages With Opt82
Untrusted Client
Messages With Opt82
Configure System Information
Description
The interface from which the DHCP message is received.
The number of DHCP message with option82 received from an untrusted server.
The number of DHCP message with option82 received from an untrusted client.
107 User Manual