Programming Software; Earliest Version Software Requirements For The Pc; Programming With Simpl Windows - Crestron UPX-2 Reference Manual

Universal Presentation Processor

Programming Software

Configuration Manager
4 ¥ UPX-2: Universal Presentation Processor
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron's True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.

Earliest Version Software Requirements for the PC

NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows
a Cresnet system. The following are the minimum recommended software versions
for the PC:
Software
TASK
Program control system to
operate the UPX-2
Create user interface for UPX-2
Uploading program and firmware

Programming with SIMPL Windows

SIMPL Windows is Crestron's premier software for programming Crestron control
systems. It is organized into two separate, but equally important "Managers".
Configuration Manager is the view where programmers "build" a Crestron control
system by selecting hardware from the Device Library. The UPX-2 can connect to a
control system over Cresnet or Ethernet.
•
To incorporate the UPX-2 into a system using Cresnet, drag the UPX-2
from the Touchpanels | Touchpanels (Cresnet) folder of the Device Library
and drop it in the System Views.
Crestron UPX-2

-based software tools to develop
REQUIRED SOFTWARE VERSION
SIMPL Windows version 2.06.20 or later
with SIMPL+ Cross Compiler version 1.1 or
later; Also requires Crestron Database
version 17.4.4 or later
Vision Tools Pro-e (VT Pro-e) version 3.3 or
later.
Crestron Toolbox 1.2.10 or later
Reference Guide – DOC. 6286A