Annotation - Crestron UPX-2 Reference Manual

Crestron UPX-2
General Procedure
Programming Example
Saving Annotations
Reference Guide - DOC. 6286A
The touchpanel analog join is selected in the VT Pro-e project using the Display
Output tab (in this example, join 25).

Annotation

Annotation tools can be created to annotate video windows, RGB windows, and
embedded application files.
To create an annotation function in a UPX-2 program:
•
Add device extenders for annotation in SIMPL Windows.
•
Create a full-page video window in VT Pro-e for annotation. Annotation
cannot be created with a small video window that is to be displayed at full-
screen on output B.
•
Either do a page flip or logic page full to the full screen video window,
when annotating.
•
Add a delay of one second before switching output B to display output A.
(This will allow the UPX-2 to send the source and switch to annotation
mode while minimizing screen flicker.)
Use the following logic to turn Annotation on and off. The touchpanel interface and
the Annotation device extender (helper symbol) are required. Refer to the SIMPL
Windows help file for information on device extenders and specific information
about the Annotation Reserved Joins.
SIMPL Windows Annotation On/Off Logic
Annotations can be saved as graphics files (JPG, BMP) or MediaMarker files. The
file format is specified in the "Media Marker Session Information" window
(accessed from the SETUP MENU).
Universal Presentation Processor
Universal Presentation Processor: UPX-2 • 25