Crestron UPX-2 Reference Manual page 24

Universal Presentation Processor
20 ¥ UPX-2: Universal Presentation Processor
"Popup Window Properties" – Design Tab
NOTE: The Show/Hide digital feedback join is seen on output A only, and displays
the popup on top of all objects and subpages. The Show To Display Output digital
feedback join determines if the popup window will be displayed normal, hidden, or
black on output B (refer to notes on page 17).
•
Popup windows are created at the project level and can be viewed from any
page. At run time, the popup window is created as the top-most window –
above the page and all embedded applications. You can assign the popup to
appear anywhere on the screen.
•
Default position and size can be assigned to each popup window. Unlike a
subpage reference, default position can only be changed from the "Popup
Window Properties" window. Alternatively, four analog joins can be
assigned to dynamically change left, top, width and height.
•
One digital feedback join must be assigned to trigger the popup window to
show/hide. Assigning digital join 0 will prevent the popup window from
being compiled.
•
Use the Effect tab to select: the amount of translucency, the transition effect
(none, dissolve, emerge, fly from top, fly from left), and the speed of the
transition. Different effects can be assigned for opening and closing a popup
window.
Crestron UPX-2
Reference Guide – DOC. 6286A