Universal Presentation Processor
UPX-2 Video Processing Block Diagram
2 ¥ UPX-2: Universal Presentation Processor
simultaneously display up to three sources; two video sources and one RGB source,
or two RGB and one video source. The following diagram illustrates the video
processing capabilities of the UPX-2.
Additional Capabilities
Touchpanel and Audience Display
The UPX-2 has two outputs. Output A for the presenter touchpanel, and output B for
the audience display. Each output may display a different source or the same source.
NOTE: The output resolution of both output A and B must match the resolution of
the touchpanel display.
Popup Windows
Popup windows (menus, controls, and toolbars) appear on the DualTouch™
Technology touchpanel (output A) and can be displayed or hidden on the audience
display device (output B). Popup windows are similar to a subpage, but unlike a
subpage, there is no reference to the popup on any of the pages. If the popup is set to
display, it will show up on top of each page in the project. Refer to "Popup
Windows" on page 18 for additional popup information. The following illustration
shows a list of popup windows in the demo program.
Crestron UPX-2
Reference Guide – DOC. 6286A