Video Windows - Crestron UPX-2 Reference Manual

Crestron UPX-2
Dynamic Graphic File
Locations
Analog Output
Security Issues
Reference Guide - DOC. 6286A
The dynamic graphic files can be accessed from the following sources:
•
A public drive (e.g., e:\user\) on the device;
•
An external flash drive attached to the device;
•
A UNC server (e.g., \\myserver\\users\) on a LAN;
•
A URL server on a LAN (e.g., 192.168.121.22/);
•
Internet Server (web server or ftp server)
All dynamic graphic errors (invalid path/filename, failure to download) are sent to
the defined analog join number with the analog value indicating the specific error.
The analog output associated with the dynamic graphic has four defined values.
•
0 = no error
•
1 = invalid path or file name
•
2 = failed to download the file
•
3 = file size is too big
To load files from a UNC network server that requires a password, the required
drives need to be pre-mapped. The user can do this from the SETUP MENU. By
making the connection persistent, the connection will be re-established after the
device is rebooted.

Video Windows

Video windows created on a page in a VT Pro-e project can be configured using the
"Video Properties" window. Once a video window is created using the Draw | RGB
Window or Draw | Video Window
window to open "RGB Video Properties" or "Video Properties" window so you can
configure the source, position, and size using the input selection.
Assigning a default input always displays that video or RGB source. To change a
video or RGB source in the window, assign an analog join number for input
selection. Once an analog value is assigned, it overrides the default input.
The following sources may be displayed on output A.
•
Maximum of two video sources per page
•
Maximum of two RGB sources per page
•
Maximum of two video & one RGB source
•
Maximum of two RGB & one video source
Universal Presentation Processor
options, double-click the video
Universal Presentation Processor: UPX-2 • 13