Embedded Applications - Crestron UPX-2 Reference Manual

Crestron UPX-2
Embedded Applications for UPX-2, UPX-2_1GB, and UPX-2-MSO as shown in "Project View"
Reference Guide - DOC. 6286A
"Popup Window Properties" – Effect Tab

Embedded Applications

A number of third party or in-house applications are embedded in a UPX-2 project.
For a list of embedded applications, refer to "UPX-2 Model Lineup" on page 6.
Embedded applications have the following features:
•
All embedded applications listed in the VT Pro-e workspace are created by
default for a new UPX-2 project.
•
All applications are created at project-level – one instance per project.
•
Each application can be assigned a static position and size that is used when
a respective analog join is not assigned.
•
Each application can be viewed from any page at runtime.
•
Up to four analog joins can be assigned to each application to dynamically
change position and size.
•
One feedback digital join must be assigned to dynamically show/hide the
application. (In the initial release this is a digital join. Future releases can
use an analog or digital join number).
Universal Presentation Processor
Universal Presentation Processor: UPX-2 • 21