Crestron UPX-2
UPX Debug Output Window
Reference Guide - DOC. 6286A
The "Upx Debug Output" window is used to view messages, errors, and network
traffic. This information can be used to troubleshoot the UPX-2.
•
Access the "Upx Debug Output" window by pressing Ctrl+Alt+Shift on
®
the PS/2
keyboard connected to the UPX-2.
•
When prompted, enter the user account upxadmin, and the password
upxadmin and click Validate.
"Security" Window
When the "Upx Debug Output" window is open, all of the visible buttons
on the screen will display their assigned join numbers.
Three tabs are displayed when the "Upx Debug Output" window opens.
⇒
Message Log tab
⇒
Join Info tab
⇒
Connections tab
UPX Debug Window Menus
The "UPX Debug Output" window contains seven pull-down menus.
"UPX Debug Output" Window
Log – The message log permits you to copy, save to file, clear error messages and
enable automatic scrolling.
Join – The Join menu permits you to clear join trace and join watch.
Connection – The Connection menu allows you to copy the log in the left column,
turn off the trace function, and allow the log to automatically scroll.
View – Enables you to view the toolbar and set the translucency level. Translucency
level can be set from 50 to 100% in 10% increments.
Project – This menu allows you to hide the system bar and open the SETUP MENU.
System – Allows you to show/hide the cursor, display the command prompt, exit the
debug mode, close all applications, or shut down and reboot the UPX-2.
Universal Presentation Processor
Universal Presentation Processor: UPX-2 • 31