Language Support; Setup Menu; Embedded Applications - Crestron UPX-2 Reference Manual

Crestron UPX-2
Reference Guide - DOC. 6286A
•
Admin Username and Password: Admin Username and Password will
be set to upxadmin.
•
Hostname and Workgroup name: The hostname and workgroup name
of the UPX-2 will reset to their factory defaults.

Language Support

The UPX-2 supports English. The following languages are supported when the
firmware upgrade upx-2-mso_mlp_2.0.csz is installed.
UPX-2 Languages
Arabic Simplified
Chinese Traditional
Danish
Finnish
Greek
Icelandic
Japanese
Lithuanian
Portuguese
Serbian
Spanish

SETUP MENU

Always press the Save & Reboot button on the SETUP MENU to commit changes
made in the SETUP MENU. Using the reset button to reboot may not save all of the
changes.
Users can change the default screen capture file location from the Annotation section
of the SETUP MENU.

Embedded Applications

Always initialize an application's serial path, position analog values, and size analog
values before sending the digital/analog value to open the application. The
application window will be created at the desired location with the file already
loaded and without excessive flashing on the screen. Otherwise, the application will
load, then close, then load with the correct file.
To optimize system performance, try not to leave multiple applications open
simultaneously.
To programmatically open files on network resources (via serial join) that require a
password, map the required drives as described in "Network Connections", shown in
the next section.
Users can browse the network using the "File Open" windows but may need to enter
a user name and password when browsing network drives.
Typing a full path name into a file path will not work if a connection has not been
mapped. The server and share name should be mapped first before adding subfolder
names. Ex. \\my_server\some_share will prompt for a username and password but
\\my_server\some_share\a_folder\mydoc.doc will only say the resource is unknown.
For the default file path and file dialog of an embedded PowerPoint application to
work properly, the default path assigned in VTPro-e should contain a single "\"
rather than a double "\\" before a folder name or file name. For example,
"g:\embedded apps\crestron.ppt.
Universal Presentation Processor
Arabic Traditional
Croatian
Dutch
French
Hebrew
Indonesian
Korean
Norwegian
Romanian
Slovak
Swedish
Universal Presentation Processor: UPX-2 • 29
Chinese Simplified
Czech
Estonian
German
Hungarian
Italian
Latvian
Polish
Russian
Slovenian
Turkish