Universal Presentation Processor
Programming Tips
28 ¥ UPX-2: Universal Presentation Processor
Analog Output Definitions (Continued)
SECTION
Screen Capture
1: Ready
Progress
2: Busy
3: Success
4: Failed; Invalid file path
5: Failed; Write error
6: Failed; Unknown error
7: Session folder invalid
Other
1: Embedded Application; Default file will be used when the
Errors/Warnings
application opens
2: Embedded Application; No valid file selected-User canceled
File dialog
3: Embedded Application; Invalid File
51: Invalid video source
121: Invalid .vtz file
122: Invalid MediaMarker template file
151 through 156: Unexpected error; Refer to UPX-2 error log
The UPX-2 is a complex product requiring knowledge in many areas. This section is
intended to shed light in certain areas to help the developer speed up development
and optimize run-time performance.
Restoring UPX-2 Default Settings
To restore the default settings of UPX-2:
1. Connect to the UPX-2 as described in the latest version of the UPX-2
Operations Guide (Doc. 6276).
2. Open a console window in Crestron Toolbox and type the command
RESTORE. This command will affect the following parameters:
•
IP Table: All IP table entries are deleted.
•
Video/RGB settings: Settings are reset to "0"
•
Net ID: Reset Net ID to 03
•
Display Output B will be set to 1024 x 768
•
Project Working Path: The Project Working Path will be set to
user\display
•
Internet Security settings: High for Internet sites, Medium for Intranet,
Low for Trusted sites. Trusted sites list is restored to crestron.com and
192.168.*.*.
•
Standby Timeout: Standby Timeout will be reset to 10 minutes
•
Console settings: Restored to factory defaults (115200 Baud, no parity,
8 data bits, 1 stop bit)
•
Mouse cursor show/hide status: Restored to factory default setting:
"Hidden"
•
Ethernet Settings: TCP/IP properties will change to DHCP
•
Mapped Drives: All mapped drives will be cleared.
Crestron UPX-2
ANALOG VALUE DEFINITION
Reference Guide – DOC. 6286A