Crestron UPX-2 Reference Manual page 23

Crestron upx-2 universal presentation processor: reference guide

Hide thumbs Also See for UPX-2:

Table of Contents

Crestron UPX-2

Create a Popup Window

Edit a Popup Window

Design a Popup Window

Reference Guide - DOC. 6286A

Unlike subpages (where you draw the location on any main page), a popup window's

position is either a default position or assigned by join numbers.

Up to 24 popup windows (controls, menus, toolbars, etc.) can be created within a

UPX-2 project. These popup windows are listed in theVT Pro-e workspace as shown

in the following illustration.

Popup Windows in VT Pro-e "Project View"

Right-click on the Popup Windows folder. If the folder does not exist, right-

click on the project name and select Create Popup Window.

Select Create Popup Window and assign a name.

Right-click on the popup window name and select Properties. Alternatively, you

can select the popup window name and press Ctrl + P.

Popup Window Right-Click Menu

The position of the popup window is either fixed or dynamically assigned by an

analog join number. Design the window by selecting the height; width, size and

digital join number.

Universal Presentation Processor

Universal Presentation Processor: UPX-2 • 19

Table of Contents