Setup; Mounting - Crestron DualTouch DTT-18 Operation Manual

Crestron DTT-18

Setup

• DTT-18: DualTouch™ Technology Touchpanel
10

Mounting

Align the bearing hub on the back of the DTT-18 with the V-groove in the stand.
With the back of the DTT-18 resting against the stand, lower the unit so that the
bearing recess in the stand captures the bearing hub.
The DTT-18 can be locked in a vertical or horizontal position using the two lock
brackets.
Lock Bracket Positions
NOTE: Do not operate the incline adjustment handles when the DTT-18 is not in the
stand.
DualTouch™ Technology Touchpanel
Operations Guide – DOC. 6290