Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Crestron DualTouch DTT-17
Summary of Contents for Crestron DualTouch DTT-17
- Page 1 Crestron DTT-17 DualTouch™ Technology Touchpanel Operations Guide...
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc...
-
Page 3: Table Of Contents
DualTouch™ Technology Touchpanel Contents DualTouch™ Technology Touchpanel: DTT-17 Introduction ...1 Features and Functions ... 1 Specifications ... 3 Physical Description ... 4 Industry Compliance... 8 Setup...9 Hardware Hookup... 9 Display Settings... 11 Using the Pen... 14 Cleaning... 15 Alternative Mounting ... 16 Problem Solving ...17... -
Page 5: Dualtouch™ Technology Touchpanel: Dtt-17
• • • • Includes a tabletop stand with tilt adjustment NOTE: The DTT-17 can only be used with the UPX-2 units with the 1GB Build (firmware version 2.00) or later. Operations Guide – DOC. 6343 ® exclusive DualTouch™ Technology Touchpanel ®... - Page 6 Crestron DTT-17 DTT-17 DualTouch Technology Touchpanel and UPX-2 Universal Presentation Processor Typical Application RoomView ® RoomView Room & Facility Management Streaming Video via Ethernet/LAN and NetMeeting Digital Media Storage Server DualTouch™ Technology Touchpanel: DTT-17 DualTouch™ Technology Touchpanel DTT-15V2 Webcam UPX-2...
-
Page 7: Specifications
DualTouch™ Technology Touchpanel Specifications The following table provides a summary of specifications for the DTT-17. DTT-17 Specifications Power Requirements Controls and Indicators Operations Guide – DOC. 6343 SPECIFICATION 45 Watts (3.75 Amps @ 12 Volts DC) Power Supply Included Connectors... -
Page 8: Physical Description
This does not mean the device is defective. The quality control standards are based on internationally accepted standards for LCD monitors. Of the 786,432 pixels on each DTT-17, 99.999% are required to function perfectly, and no pixels are allowed to be always white or always black. A small number of pixels (10 or less) may acceptably display an incorrect color for some portion of the color spectrum. -
Page 9: Dualtouch™ Technology Touchpanel Crestron Dtt
DualTouch™ Technology Touchpanel Crestron DTT-17 DTT-17 Physical View – Side and Front Dimensions DTT-17 Physical View – Side (Maximum and Minimum Height) Operations Guide – DOC. 6343 DualTouch™ Technology Touchpanel: DTT-17... - Page 10 Crestron DTT-17 DTT-17 Physical View – Rear (Stand Not Shown) The DTT-17 is shipped with the following accessories. One Pen (with tip replacements) and One Pen Stand One USB Cable Approximately 6-feet long. One DVI/I RGB Cable Approximately 6-feet long.
- Page 11 DualTouch™ Technology Touchpanel Ports The ports are located on the right rear side of the DTT-17 under a slide-off protective cover. The serial connector is not used in this application. USB 2.0 One Universal Serial Bus (USB) type “B” female connector is provided for data transfer, and may be connected to any of the four USB ports on the UPX-2, although the port shown on page 10 is the preferred port.
-
Page 12: Industry Compliance
Signaling (DPMS) compliant computer or graphics card, the DTT-17 automatically complies with the following power saving parameters. Industry Compliance As of the date of manufacture, the DTT-17 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labeling. -
Page 13: Setup
UPX-2 and the DTT-17 are both powered down before beginning. CAUTION: To avoid damage to the DTT-17 or to your video card, never connect or disconnect the video or power cable while the DTT-17 or the UPX-2 are powered up. - Page 14 8. Connect the line cord to the power supply and an AC outlet. 9. Power up the DTT-17. The power indicator should light up orange. 10. Power up the UPX-2. When a video signal is applied to the DTT-17, the power indicator will turn blue.
-
Page 15: Display Settings
DualTouch™ Technology Touchpanel Display Settings Four controls are located on the upper right front side of the DTT-17 for display setup. Display Controls The Menu button provides access to the following 11 adjustment menus. Use the Selection (-)/(+) buttons to select a menu or advance forward or backward through the 11 menus. - Page 16 Crestron DTT-17 DualTouch™ Technology Touchpanel: DTT-17 DualTouch™ Technology Touchpanel 4. Pitch – Use the (-)/(+) buttons to manually reduce vertical distortion lines. The Reset menu ( ) is used for automatic adjustment. Press Enter to save. Default is 127. PITCH 48.3KHz...
- Page 17 6). Use RECALL to reset all screen options to the factory default. Select the exit icon to leave this menu without making any changes. 10. Backlight – Use the (-)/(+) buttons to decrease or increase the backlight brightness. Press Enter to save. Default is 80. DualTouch™ Technology Touchpanel: DTT-17 Crestron DTT-17...
-
Page 18: Using The Pen
Raising the tip above the surface of the DTT-17 is the same as releasing a mouse button. If there is no eraser switch on the top of the pen, the side switch is set to Eraser by default in the supporting MediaMarker Notebook™... -
Page 19: Cleaning
To clean the surface of the display screen, use an anti-static cloth or very slightly dampened cloth. Apply only very light pressure and do not make the screen surface wet. Never use detergents or solvents to clean the screen. DualTouch™ Technology Touchpanel: DTT-17 Crestron DTT-17 Firmly slide the new tip (square end first) into the barrel of the pen and press in until it stops. -
Page 20: Alternative Mounting
Crestron DTT-17 Alternative Mounting The DTT-17 may be removed from the adjustable stand and remounted to a VESA conforming mount arm or stand. The Video Electronics Standards Association (VESA) is an international non-profit corporation that supports and sets industry- wide interface standards for the PC, workstation, and computing environments. -
Page 21: Problem Solving
DualTouch™ Technology Touchpanel Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DTT-17 Troubleshooting Operations Guide – DOC. 6343 TROUBLE POSSIBLE CAUSE(S) DTT-17 does not The DTT-17 is not function. -
Page 22: Further Inquiries
For assistance in your local time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 23: Return And Warranty Policies
CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 24 Crestron Electronics, Inc. Operations Guide – DOC. 6343 15 Volvo Drive Rockleigh, NJ 07647 (2012349) Tel: 888.CRESTRON 01.06 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.