Access The Setup Screens - Crestron TSW-560 Supplemental Manual

Access the Setup Screens

The setup screens enable basic configuration prior to regular operation of the
touch screen.
NOTE: The Crestron TSW-560P 5 in. portrait touch screen provides the same setup
screens that are described in this guide, but the appearance and layout of the screens
have been modified for portrait orientation.
To access the setup screens during regular operation:
Place five fingers on the touch screen display and hold for 15 seconds.
•
Tap the hard keys labeled below as 1, 2, 3, and 4 in sequence twice
•
(tap 1, 2, 3, 4, 1, 2, 3, 4) within a 5-second period.
Touch Screen Hard Key Assignment
NOTE:
assignment shown in the illustration above. For more information, refer to
"Access the Setup Screens" in the TSW-560P DO Guide (Doc. 7973) at
www.crestron.com/manuals.
4 • TSW-560/TSW-760/TSW-1060: Touch Screens
The hard key button assignment for the TSW-560P differs from
Supplemental Guide – DOC. 7927G