Direct Connect Time; Airprint; Google Cloud Print - Kodak VERITE Craft 6 Extended User Manual

Direct Connect Time

The setting of the Disconnect time when no Direct Mode operation
is detected.
1
From the Control panel, navigate to
[Home > Setup > Direct Connect Time],
then press .
2
Press to select Direct
Connect Time among the selection from
[Disconnect], [5 min], [10 min], [60
min] and [Unlimited].
3
Press to confirm.
If you select [Unlimited], when the
–
mobile is connected by Direct Mode
until selecting [Disconnect] this unit
remains in the Direct Mode.
If you select [Disconnect], the Direct Connection will be
–
immediately terminated.

AirPrint

Enable or disable the AirPrint function.
1
From the Control panel, navigate to
[Home > Setup > AirPrint], then press
.
2
Press to set [Enable] or
[Disable].
3
Press to confirm.
English

Google Cloud Print™

You can set the Google Cloud Print™ settings.
Status
Setup Display the connection status or registration status of the Google
Wi-Fi Setup
Cloud Print™ service.
Enable Wi-Fi
Device Setup
1
From the Control panel, navigate to
Direct Connect Time
[Home > Setup > Google Cloud Print >
Back Select
Status], then press
Direct Connect Time
Disconnect
5 min
10 min
2
The Google Cloud Print™ connection (or
60 min
registration) status and unit name will be
Cancel Select
shown on the Menu display.
The [VeriteC6-XXXX] represents the
–
unit name of your unit.
3
Press
menu.
The following table shows the Google Cloud Print™ service
registration and connection status of this unit.
Status
Not
Configured
Setup
Enable Wi-Fi
Disabled
Device Setup
Direct Connect Time
AirPrint
Back Select
Not
Connected
AirPrint
Connected
Enable
Disable
Cancel Select
Disconnected
Registration in
progress
58
.
to return to the previous
Unit state
Unit is not registered to the Google Cloud Print™
service.
The Google Cloud Print™ feature is not available.
The Google Cloud Print™ service has been
disabled.
The Google Cloud Print™ feature is not available.
(Unit is registered in the Google Cloud Print™
service.)
Unit is not connected to use the Google Cloud
Print™ service.
The Google Cloud Print™ feature is not available.
(Unit is registered in the Google Cloud Print™
service.)
Unit is connected to the Google Cloud Print™
service.
The Google Cloud Print™ feature is available.
(Unit is registered in the Google Cloud Print™
service.)
Unit has been disconnected from the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not available.
(Unit is registered in the Google Cloud Print™
service.)
Registration is in process to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not available.
Registration should complete, please wait.
Continued on next page.
Google Cloud Print
Status
Register
Enable/Disable
Back Select
Google Cloud Print
Status
Not Configured
VeriteC6-XXXX
Back