Direct Connect Time; Airprint; Google Cloud Print - Kodak Verite 65 Plus Extended User Manual

Direct Connect Time

The setting of the Disconnect time when no Direct Mode operation is
detected.
1
From the Control panel, navigate to
[Home > Setup > Direct Connect Time],
then press .
2
Press to select Direct
Connect Time among the selection from
[Disconnect], [5 min], [10 min], [60 min]
and [Unlimited].
3
Press to confirm.
– If you select [Unlimited], when the
mobile is connected by Direct Mode until
selecting [Disconnect] this unit remains in
the Direct Mode.
– If you select [Disconnect], the Direct
Connection will be immediately
terminated.

AirPrint

Enable or disable the AirPrint function.
1
From the Control panel, navigate to
[Home > Setup > AirPrint], then press
.
2
Press to set [Enable] or
[Disable].
3
Press to confirm.
English

Google Cloud Print™

You can set the Google Cloud Print™ settings.
•
Status
Display the connection status or registration
Setup status of the Google Cloud Print™ service.
Wi-Fi Setup
Enable Wi-Fi
1
From the Control panel, navigate to [Home
Device Setup
> Setup > Google Cloud Print > Status],
Direct Connect Time
then press
Back Select
2
The Google Cloud Print™ connection (or
registration) status and unit name will be
shown on the Menu display.
– The Verite65Plus-XXXX represents the
Direct Connect Time
Disconnect
3
Press
5 min
10 min
60 min
Cancel Select
The following table shows the Google Cloud Print™ service registration
and connection status of this unit.
Not Configured
Disabled
Setup
Enable Wi-Fi
Device Setup
Direct Connect Time
AirPrint
Back Select
Not Connected
Connected
AirPrint
Enable
Disable
Disconnected
Cancel Select
Registration in
progress
50
.
unit name of your unit.
to return to the previous menu.
Status
Unit is not registered to the Google Cloud
Print™ service.
The Google Cloud Print™ feature is not
available.
The Google Cloud Print™ service has been
disabled.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)
Unit is not connected to use the Google Cloud
Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)
Unit is connected from the Google Cloud
Print™ service.
The Google Cloud Print™ feature is available.
(Unit is registered in the Google Cloud Print™
service.)
Unit has been disconnected to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not
available. (Unit is registered in the Google
Cloud Print™ service.)
Registration is in process to use the Google
Cloud Print™ service.
The Google Cloud Print™ feature is not
available.
Registration should complete, please wait.
Google Cloud Print
Status
Register
Enable/Disable
Back Select
Google Cloud Print
Status
Not Configured
Verite65Plus-XXXX
Back
Unit state
Continued on next page.