Installation; Eacie Panel Description; Figure 2 - Location Of Eacie Panel Components - C-TEC EACIE Installation, Maintenance & Operating Manual

Evacuation alert control and indicating equipment

Hide thumbs Also See for EACIE:

Table of Contents

EACIE Evacuation Alert Control and Indicating Equipment

5 INSTALLATION

Note: The installation should be carried out in accordance BS 8629 (code of practice for the design,

installation, commissioning and maintenance of evacuation alert systems for use by the fire and rescue

service in buildings containing flats).

See section 7.1 for a recommended shortform installation procedure.

5.1

The EACIE panel is mounted inside a separate protective cabinet (not shown below). The panel's chassis

comprises of a hinged steel lid and a steel back box which houses a power supply unit (PSU) and several PCBs,

as shown in Figure 2 below. Space is available inside the chassis for the two backup batteries.

The EAP4/48/CA/CHASSIS, 48 zone, 4 loop version is shown below.

Figure 2 – Location of EACIE Panel Components

Page 9 of 38  Approved Document No. DFU5030020 Rev 1  Installation and Programming Manual

Table of Contents