Table of Contents
Advertisement
EACIE Evacuation Alert Control and Indicating Equipment
7.4.1.5
Replace Device
This function may be used, for example, to replace a faulty loop device without requiring a new loop learn.
When the Replace Device button is pressed, select the loop and device number. Replace the selected loop device,
as required. If a device has been replaced, the panel will auto-address the new device at the selected loop and
device number.
7.4.1.6
Change Address
This function allows you to change the address for the selected device.
7.4.1.7
Show Device Data
This function allows you to read the selected device's type, loop address and debug information.
7.4.1.8
Add Device
After the device's parameters have been added, perform a loop learn.
7.4.2
Show PSU Status
This function allows you to view information regarding the state of the panel's PSU and its standby batteries.
7.4.3
Test Output Group
This function allows you to perform tests on the panel's Output Groups.
At Access Level 3 > Engineering Functions, press the
be tested from the list of available groups. In the next window choose the type of test to be performed on the
Output Group including: OFF, ON and PULSED test.
7.4.4
Show Loop Status
Page 25 of 38 Approved Document No. DFU5030020 Rev 1 Installation and Programming Manual
This function allows devices to be added to a loop.
In the Loop Devices window (shown in section 7.4.1), press a
'no device fitted' icon
Press the
section 7.4.1.2 appears allowing the device's parameters to be
added.
button and choose the Output Group to
This function allows you to check the loop isolator(s)
condition.
At Access Level 3 > Engineering Functions, press the
button and a window similar to the one
shown left appears.
If there is a fault on one of the loops the background colour
of the switch will change from green to yellow.
Bear in mind the actual loop current shown is indicative only
and may not be the precise electrical current drawn by the
loop(s).
and the display shown left appears.
button and the display shown in
Advertisement
Table of Contents
