Set The Panel's Time And Date; Show Supervisory Events - C-TEC EACIE Installation, Maintenance & Operating Manual

EACIE Evacuation Alert Control and Indicating Equipment
7.7

Set the Panel's Time and Date

This function is used to set the panel's time and date which is required for accurate logging of events in the
panel's log. The panel has a real-time 24 hour clock with default time and date settings. An automatic DST
(Daylight Saving Time) option is available which will automatically adjust the panel's clock one hour forward on
the last Sunday in March and one hour backward on the last Sunday in October.
At Access Level 3, press the
Adjust the time and date using the touchscreen's numeric keypad and
daylight saving time by pressing the DST tick box.
When correct, press the
7.8

Show Supervisory Events

This function is only available if relevant to the panel's status, i.e. if access level 3 supervisory events have been
programmed by an authorised systems engineer.
At Access Level 3, press the
related events, e.g. panel keyswitch activated.
Installation and Programming Manual  Approved Document No. DFU5030020 Rev 1  Page 32 of 38
button and a window similar to the one shown below appears.
button to return to the main access level 3 menus.
button. The display shows all access level 3 non-alarm, non-fault
buttons. Also, set/unset the