5. Route the display cable through the hook on the right hinge and close the right hinge.
6. Replace the two screws (M2.5x5) that secure the right hinge to the palm-rest and keyboard assembly.
NOTE:
For computers shipped without optical drive, there is an additional screw on the right hinge that secures the
right hinge to palm-rest and keyboard assembly.
Post-requisites
1. Replace the fan.
2. Replace the
base
cover.
3. Replace the
optical drive
System board
Removing the system board
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
54
Removing and installing components
(applicable only to computers shipped with optical drive).
computer. After working inside your computer, follow the instructions in
After