Post-requisites
1. Replace the battery.
2. Replace the
base
cover.
3. Replace the
optical drive
Speakers
Removing the speakers
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
optical drive
2. Remove the
base
cover.
3. Remove the
solid-state
Procedure
1. Disconnect the speaker cable from the system board.
2. Note the speaker cable routing and remove it from the routing guides on palm-rest and keyboard assembly.
3. Lift the speakers, along with the cable, off the palm-rest and keyboard assembly.
(applicable only to computers shipped with optical drive).
computer. After working inside your computer, follow the instructions in
(applicable only to computers shipped with optical drive).
drive.
Removing and installing components
After
41