Post-requisites
1. Replace the
system
board.
2. Replace the
wireless
card.
3. Replace the
heat
sink.
4. Replace the fan.
5. Replace the
solid-state
6. Replace the battery.
7. Replace the
base
cover.
8. Replace the
optical drive
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
optical drive
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
optical-drive connector board
5. Remove the fan.
6. Remove the
solid-state
7. Remove the
wireless
card.
8. Remove the speakers.
9. Remove the
hard
drive.
10. Remove the touchpad.
drive.
(applicable only to computers shipped with optical drive).
computer. After working inside your computer, follow the instructions in
(applicable only to computers shipped with optical drive).
(applicable only to computers shipped with optical drive).
drive.
Removing and installing components
After
61