Base Cover; Removing The Base Cover - Dell Inspiron 3595 Service Manual

Base cover

Removing the base cover

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
Remove the optical drive (optional).
Procedure for computers shipped without optical drive
1. Loosen the three captive screws on the base cover.
2. Remove the screw (M2x4) that secures the base cover to the palm-rest and keyboard assembly.
3. Remove the six screws (M2.5x7) that secure the base cover to the palm-rest and keyboard assembly.
4. Pry the base cover starting from the top-left corner of the computer base.
5. Lift the base cover off the palm-rest and keyboard assembly.
computer. After working inside your computer, follow the instructions in
Removing and installing components
After
13