Table of Contents
Advertisement
11. Remove the
power-adapter
12. Remove the
display
assembly.
13. Remove the
I/O
board.
14. Remove the
system
board.
NOTE:
When removing and replacing the palm-rest and keyboard assembly, do not remove the heat sink from the
system board.
15. Remove the
power button with fingerprint reader
Procedure
After performing the above steps, we are left with the palm-rest and keyboard assembly.
Replacing the palm-rest and keyboard assembly
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Procedure
Place the palm-rest and keyboard assembly on a flat surface.
62
Removing and installing components
port.
(optional).
computer. After working inside your computer, follow the instructions in
After
Advertisement
Table of Contents
