Removing And Installing Components; Recommended Tools; Screw List - Dell Inspiron 3595 Service Manual

Removing and installing components

Recommended tools

The procedures in this document may require the following tools:
• Phillips screwdriver #1
• Flat-head screwdriver
• Plastic scribe

Screw list

NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws,
and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type
is restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 1. Screw list
Component Secured to
Base cover Palm-rest and keyboard
assembly
Base cover Palm-rest and keyboard
assembly
Base cover Palm-rest and keyboard
assembly
Battery Palm-rest and keyboard
assembly
Display panel Display back-cover and
antenna assembly
Hard-drive assembly Palm-rest and keyboard
assembly
Hard-drive bracket Hard drive
Heat sink System board
Hinges Palm-rest and keyboard
assembly
Screw type Quantity
M2x2 2
M2x4 1
M2.5x7 6
M2x3 4
M2x2 4
M2x3 4
M3x3 4
M2x3 3
M2.5x5 5
Removing and installing components
2
Screw image
NOTE: Screw color
may vary depending on
the configuration
ordered.
9