Procedure
1. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
2. Replace the four screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
3. Connect the battery cable to the system board.
Post-requisites
1. Replace the
base
cover.
2. Replace the
optical drive
Memory module
Removing the memory module
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
(applicable only to computers shipped with optical drive).
computer. After working inside your computer, follow the instructions in
Removing and installing components
After
21