Configuring Remote Logging - Cisco RV120W Administration Manual

Administering Your Cisco RV120W
Configuring Logging
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
Cisco RV120W Administration Guide
will be dropped and a message will be logged. (Make sure the log option is
set to allow for this firewall rule.)
Under the type of system logs, select the type of system events to be logged. The
following system events can be recorded:
• All Unicast Traffic—Check this box to log all unicast packets directed to the
router.
• All Broadcast/Multicast Traffic—Check this box to log all broadcast or
multicast packets directed to the router.
Under "other events logs," select the type of event to be logged. The following
events can be recorded:
• Source MAC Filter—Check this box to log packets matched due to source
MAC filtering. Uncheck this box to disable source MAC filtering logs.
• Bandwidth Limit—Check this box to log packets dropped due to Bandwidth
Limiting.
Click Save.

Configuring Remote Logging

To configure remote logging:
Choose Administration > Logging > Remote Logging Configuration.
In the Remote Log Identifier field, enter a prefix to add to every logged message
for easier identification of the source of the message. The log identifier will be
added to both e-mail and Syslog messages.
Click Save.
7
128