Configuring The Discovery Settings; Configuring Bonjour - Cisco RV120W Administration Manual

Administering Your Cisco RV120W

Configuring the Discovery Settings

STEP 5
STEP 6
STEP 7
Configuring the Discovery Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV120W Administration Guide
Under Logging Policy, choose the type of logging policy. (See
Logging Policies, page
are disabled.
If you want the router to send logs to a Syslog server, check the box next to a
syslog server field and enter the IP address or Internet Name of the Syslog server
in the Syslog Server field. Choose the logging policy for each syslog server. You
can configure up to 8 syslog servers.
Click Save.
The Cisco RV120W supports two types of discovery protocols: Bonjour and UPnP.
Bonjour is a service advertisement and discovery protocol. Universal Plug and
Play (UPnP) is a networking protocol that allows devices to discover each other
and communicate on the network.

Configuring Bonjour

To configure Bonjour:
Choose Administration > Discovery Settings > Discovery - Bonjour.
Check the Enable box to enable Bonjour on the router. Unchecking this will disable
Bonjour.
In the Bonjour Interface Control Table, you can see on which VLANs Bonjour is
enabled. For example, Bonjour is by default enabled on the default VLAN ID 1. That
means that the Cisco RV120W advertises itself to all devices connected to it on
VLAN 1, and devices joining the network can connect to the Cisco RV120W. If you
have other VLANs created on your network, you can enable Bonjour on those
VLANs too. (See Configuring Virtual LAN (VLAN) Membership, page 30
more information.)
Click Save.
127.) By default, only IPsec VPN logs are enabled. Others
7
Configuring
for
130