Using Network Diagnostic Tools; Using Ping; Using Traceroute - Cisco RV120W Administration Manual

Administering Your Cisco RV120W

Using Network Diagnostic Tools

STEP 3
STEP 4
Using Network Diagnostic Tools
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco RV120W Administration Guide
(Optional) Check the box to send an email alert when the traffic limit has been
reached and traffic is being blocked.
Click Save.
To viewing traffic statistics, choose Administration > WAN Traffic Meter. Under
WAN (Internet) Traffic Statistics, information is displayed about WAN traffic to and
from the Cisco RV120W.

Using PING

PING can be used to test connectivity between this router and another device on
the network connected to this router. To use PING:
Choose Diagnostics > Network Tools.
Under Ping or Trace an IP Address, enter an IP address or domain name and click
Ping. A popup window appears, indicating the ICMP echo request status.
(Optional) Check the box if you want to allow PING traffic to pass through VPN
tunnels.

Using Traceroute

Traceroute displays all the routers present between the destination IP address
and this router. Up to 30 "hops" (intermediate routers) between this router and the
destination will be displayed. To use traceroute:
Choose Diagnostics > Network Tools.
Under Ping or Trace an IP Address, enter an IP address or domain name and click
Traceroute. A popup window appears with the hop information.
7
125