Lan Ethernet Interfaces; Wireless Access Point; Firewall And Vpn Client Access; Wireless Distribution System - Cisco RV120W Administration Manual

Introduction
Product Overview

Cisco RV120W Administration Guide

LAN Ethernet Interfaces

The Cisco RV120W provides four full-duplex 10/100 Ethernet LAN interfaces that
can connect up to four devices.

Wireless Access Point

The wireless access point supports the 802. 1 1n standard with MIMO technology,
which multiplies the effective data rate. This technology provides better
throughput and coverage than 802. 1 1g networks.

Firewall and VPN Client Access

The Cisco RV120W incorporates a Stateful Packet Inspection (SPI)-based firewall
with Denial of Service (DoS) prevention and a Virtual Private Network (VPN)
engine for secure communication between mobile or remote workers and branch
offices.
The Cisco RV120W supports up to ten gateway-to-gateway IP Security (IPsec)
tunnels to facilitate branch office connectivity through encrypted virtual links.
Users connecting through a VPN tunnel are attached to your company's network
with secure access to files, e-mail, and your intranet as if they were in the building.
You can also use the VPN capability to allow users on your small office network to
securely connect out to a corporate network

Wireless Distribution System

The Cisco RV120W's wireless access point supports Wireless Distribution
System (WDS), which allows the wireless coverage to be expanded without wires.

Virtual Networks

The access point also supports multiple SSIDs for the use of virtual networks (up
to 4 separate virtual networks), with 802. 1 Q-based VLAN support for traffic
separation.
1
2