Configuring Advanced Dhcp Settings; Configuring Automatic Configuration Download - Cisco RV120W Administration Manual

Wireless-n vpn firewall
Hide thumbs Also See for RV120W:
Table of Contents

Advertisement

Configuring Networking
Configuring the LAN (Local Network) Settings
STEP 4
NOTE
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV120W Administration Guide
Enter the MAC address of the device. The format for the MAC Address is
XX:XX:XX:XX:XX:XX where X is a number from 0 to 9 (inclusive) or an alphabetical
letter between A and F (inclusive).
The IP Address assigned should be outside the pool of the DHCP addresses
configured. The DHCP pool is treated as generic pool and all reserved IPs should
be outside this pool. The DHCP server will then serve the reserved IP address
when the device using the corresponding MAC address requests an IP address.
Click Save.

Configuring Advanced DHCP Settings

Configuring Automatic Configuration Download

You can configure the Cisco RV120W to download a configuration file from a TFTP
server. Upon rebooting, the firewall downloads the file.
To configure automatic configuration download:
Choose Networking > LAN (Local Network) > Advanced DHCP Configuration.
Check Enable to enable downloading of configuration files.
Choose the TFTP server type:
Host Name—Enter the host name of the TFTP server in the TFTP server host
name field.
Address—Enter the IP address of the TFTP server in the TFTP Server IP
field.
Click Save.
2
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents