Monitoring Vpn Tunnel Status - Cisco RV120W Administration Manual

Configuring Virtual Private Networks (VPNs) and Security
Configuring Advanced VPN Parameters
Cisco RV120W Administration Guide
The user database contains the list of VPN user accounts that are authorized to
use a given VPN tunnel. Alternatively VPN tunnel users can be authenticated using
a configured RADIUS database. Refer to the online help to determine how to
populate the user database and/or configure RADIUS authentication.

Monitoring VPN Tunnel Status

You can view and change the status of (connect or drop) the router's IPsec
security associations by performing one of the following actions:
• Choose VPN > IPsec > Advanced VPN Setup and click IPsec VPN
Connection Status.
• Choose Status > IPsec Connection Status.
Here the active IPsec SAs (security associations) are listed along with the traffic
details and tunnel state. The traffic is a cumulative measure of transmitted/
received packets since the tunnel was established.
If a VPN policy state is "not connected", it can be enabled from the List of VPN
Policies in the VPN > IPsec > Advanced VPN Setup page.
5
104